Introducing our innovative and affordable CMC system that delivers high-temperature performance tailormade for heat shield applications, spanning numerous sectors. Engineered for minimal mechanical loading, ThermaLite provides reliable and long-lasting even in the most extreme thermal conditions.

ThermaLite

IgniShield is a step change in the capability of thermal protection. This CMC is made by impregnating woven Basalt fibers with HTMS’s proprietary matrix. This solution is designed to excel in fire, smoke, and toxicity applications spanning sectors such as automotive, aerospace, and energy.

IgniShield

HTMS has developed a novel CMC material that possesses a low dielectric constant even in high-temperature environments. This is the result of integrating advanced fibers into our state-of-the-art matrix system and optimising the chemistry within the entire system.  

KappaCera

High-Temperature Low Dielectric Composite

HTMS’s exploratory approach involves integrating high-strength Carbon fibres into our advanced matrix system, which expands the operational limits of Carbon-fibre based systems far beyond their current temperature capabilities. 

CarboniteX

HTMS’s newly developed CMC system is designed to meet the complex requirements of the defence sector. Combining low observable characteristics and high-temperature endurance, PhantomWeave is a generation after next CMC material.

PhantomWeave

Multi-functional High Temperature Composite

Fire-Resistant Materials for Lithium Battery Enclosure

Lithium batteries are becoming ubiquitous in our daily lives. From our phones and laptops, scooters, cars and planes, to powering the very homes we live in, high-density electrical storage is dominated by Lithium-based chemistries. While the perceived risk from these devices is generally low, there is increasingly unease about the safety of some of these systems where performance is being pushed to the limit, and the capability of the enclosures has to keep up. While rare, the extreme heat caused by battery fires can cause serious risk to human life if the materials are not developed which can withstand and contain failures to allow emergency procedures to take over.

 Transport industries have long been exploring energy storage systems to provide power and backup support to critical equipment. From the era of Lead-Acid batteries to the evolution of Nickel-Cadmium batteries, there has been a continuous pursuit of battery systems with higher power and energy density to meet the industry's evolving needs.

A step change came in the form of Lithium-Ion battery chemistry, commercially introduced by Sony in 1991. This chemistry promised a 4 to 5 times improvement in energy/power density, with approximately half the size and weight compared to alternatives. However, at that time it was already known that there was a potential risk in using these high-energy systems. The recall of MOLI’s Li-metal rechargeable cells some years before the release of rechargeable metal anode-based lithium batteries was a reminder of these risks. Early Li-Ion battery systems experienced highly publicized commercial failures, such as the Samsung Note 7 battery fiasco in 2016, caused by manufacturing defects lead to significant public scepticism. The aerospace industry has also faced similar challenges, with the FAA reporting 470 aviation-related incidents involving lithium batteries from March 3, 2006, to December 28, 2023. Notable aviation incidents, like the Ethiopian Airways 787 fire at Heathrow Airport in 2013 and the Japan Airlines 787 at Boston Airport the same year, heightened consumer awareness and prompted safety regulations to better understand the performance and limitations of Li-Ion cells and batteries.

These efforts have led to the introduction of new approaches to mitigate the thermal reactivity of Li-Ion products. Furthermore, military and regulatory agencies have implemented new Minimum Operating Performance Standards (MOPS), such as RTCA DO-311A and MIL-PRF-29595A, offering clear guidance on the development, testing, and certification requirements for Lithium-Ion battery systems.

In the search for lower costs and higher energy densities the materials and manufacturing methods become more critical. With a separator thickness of only 20–25 µm, any small intrusion of metallic dust or other particles can have devastating consequences. Whereas a nail penetration test could be tolerated on the older 18650 cell with a capacity of 1.35 Ah, today's high-density cells with >2.4 Ah would react with fire and material release when performing the same test. Lithium-ion batteries are nearing their theoretical energy density limit and battery manufacturers are stepping up their efforts to focus on improving manufacturing methods and increasing safety.

There are a number of risks posed by these higher energy-dense batteries which need to be carefully considered.

Overcharging poses a significant risk to rechargeable lithium batteries, distinct from nickel-cadmium or lead-acid batteries. This risk may result in thermal runaway, where overcharging leads to an uncontrolled increase in temperature and pressure. Additionally, overcharging can impact internal cell components, emphasizing the importance of considering battery capacity, not just size, due to the higher amount of electrolyte and energy involved.

Over-discharging is another concern, particularly for certain types of batteries discharged beyond a specific voltage, typically 2.4 volts. This can lead to corrosion of electrodes within the cells. Recharging damaged rechargeable lithium batteries, following over-discharging, may trigger an uncontrollable exothermic reaction. Corroded electrodes can themselves become a source of short circuits (see image), with a dendrite of corrosion growing from one electrode towards the other, resulting in an internal short.

Internal short circuits present a risk attributed to various factors, including manufacturing defects, impurities, and foreign object deposits. The occurrence of an internal short circuit may lead to an uncontrolled increase in temperature and pressure, ultimately resulting in thermal runaway.

Furthermore, the possibility of reverse voltage in non-rechargeable lithium batteries, especially those with more than one cell, is an important concern. This can even lead to a thermal runaway event, posing additional risks associated with uncontrolled temperature and pressure increase.

Although there many risks associated with lithium batteries, as discussed, due to their clear advantages there is a need to alleviate these so as to maintain or even increase performance. There are many methods to reducing these risks, including by software (monitoring), electronic hardware (BMSs, temp sensors, fuses), structural design (keep batteries away from key systems), early warning systems (fire/smoke detectors), and by using materials with greater fire resistance.

In the current article there is a focus on the materials used for enclosures, what makes a safe enclosure, and how we test for suitable materials for the job.

While fire resistance is an extremely complex area, it can be broken down into a number of individual measures. This is by no means an exhaustive list, for further information, please consult the further reading found in the Resources at the end of this article.

Ignition is the start of a fire, and thus the ‘ignitability’ of a material is the general term given to a materials ability to support combustion when exposed to a naked flame under normal atmospheric conditions. This definition is contested, however, with technical and general definitions overlapping and, in some cases, contradicting. The BS 476 suite of standards laid out by the British Standards Institute dictates fire tests for materials used in the construction industry, but due to their pre-existing standards have become common throughout engineering, and contains a number of tests for determining ignitability, eg BS 476-13:1987. A materials ability to ignite under these condition is a combination of its fundamental properties, and as such some materials may not be ignitable but still be able to support fire in later stages, when conditions such as temperature and reactant availability have changed. Materials which are unable to support combustion under any circumstances are considered to be non-combustible.

The term ‘combustibility’ refers to the tendency of a substance to burn as a result of fire or chemical reaction. It is can be expressed as a property that is a measure of how easily a substance will ignite or burn, an important consideration when materials are being used or stored for construction purposes. The term ‘flammable’ may be used to describe substances that ignite more easily, whilst substances that are harder to ignite or that burn less intensely may be referred to as combustible. Less combustible materials may be described as 'materials of limited combustibility'. At the extreme end of the scale is ‘non-combustible materials’ which do not support fire at all.

Some common definitions of  ‘non-combustible materials’:

Any material which when tested to BS 476-11:1982 (2007) does not flame nor cause any rise in temperature on either the centre (specimen) or furnace thermocouples.

Products classified as non-combustible in tests following the procedures in BS 476-4:1970 (2007).

Any material classified as class A1 in accordance with BS EN 13501-1:2002 Fire classification of construction products and building elements. Classification using data from reaction to fire tests.

ISO 1182:2020 which defines a test method for determining non-combustibility performance, under specific conditions.

As an aside, the construction industry has also had some issues with fire-proof materials in recent years. Following the Grenfell Tower Fire, a decision was taken to ban combustible materials in the cladding for buildings over 18m in height. The issue was raised again in November 2019 following a fire at The Cube in Bolton. In this case HPL cladding was used, and the building was less than 18m in height, resulting in calls for the ban on combustible cladding materials to be extended.

There are a number of other measures of materials contribution to fire, or risk of fire, which are used in general across all industries.

The heat release rate has been considered by some in the academic community to be the single most important variable in determining the fire hazard posed by different materials. It is a measure of the amount of energy lost per second (I.E. power), normalised to surface area of the material, therefore measured in kW / m2. In polymer-matrix composite materials, one of the main contributors to the HRR is from hydrocarbon volatiles being released from the burning surfaces, which migrate from the decomposing matrix into the flame where they contribute their heat of combustion via oxidation. The heat release rate at different heat fluxes can be measured with a bench-scale calorimeter, which rely on the principle of oxygen consumption, i.e., materials undergoing complete combustion release a constant amount of heat per unit mass of oxygen consumed. Despite the risks to life posed by ignitability as well as smoke and toxicity, HRR is often regarded to the best predictor of overall risk as it is a global measure of a materials contribution to combustion progress.

Another way of measuring risk of fire is by analysing smoke and toxicity of fire-released gasses. One of the most immediate dangers from combusting materials is smoke and toxic gases released from the flames, and outgassing of hazardous products from the surfaces of materials undergoing thermal breakdown. It is commonly understood that a greater risk is posed from the gaseous toxic by-products of a fire than from the flames themselves.

Smoke and toxic gasses can be quantified in cone calorimeter tests by measuring the intensity of light that is transmitted through the smoke in the exhaust duct. Alternatively, the amount of combustion products given off by a sample is related to the mass loss during the combustion process. Specimens in the test are burned above a weighing device while being subjected to an external irradiance within the range of 0 to 100 kW/m2 to measure a ‘mass loss rate’.

While these general measures give an indication of the amount of smoke is given off during certain combustion conditions, whether in volume or visual density, it does not indicate the level of risk the smoke directly presents to humans breathing it. For this to be measured, the smoke must be analysed to determine the specific chemical components and compare this to the chemicals known toxicity to humans.

Tests have been conducted specifically investigating the chemical composition of gasses released during lithium battery fires. Gas components are mainly carbon monoxide, carbon dioxide, methane, ethane, ethene, and H2. Within these emitted gases can also be traces of hydrogen fluoride, phosphine, formaldehyde, acetaldehyde, propionaldehyde, butyraldehyde, valeraldehyde, and 1,3,5-trifluorobenzene. The source for fluorine components in released gases is LiPF6 which thermally decomposes at about 90°C to lithium fluoride (LiF) and phosphor(V)-fluoride (PF5) which reacts in the presence of traces of water to HF and phosphorus oxide fluoride (POF3), both compounds are toxic.

In order to design an enclosure for fire and hazard containment for a lithium or other high power battery system a number of steps would need to be followed.

Firstly, the fire threat needs to be precisely defined. This entails the product supplier, responsible for providing the item serving as the fire source, conducting an analysis and outlining the specific nature of the fire risk.

The definition of the fire resistance of the enclosure should align with both cabin safety and structural requirements, adhering to the relevant Cabin Safety Regulations (CSs). Ensuring compliance with these regulations is crucial in determining the enclosure's suitability for the intended purpose.

From a structural perspective, especially at the aircraft level, considerations of strength and stiffness become paramount. Addressing these factors is essential in accordance with damage tolerance considerations, as outlined in AMC 20-29 Categories of damage.

A critical reference point in this assessment is the glass transition temperature, denoted as Tg. It is recommended to maintain a minimum margin of 50ºF between the Maximum Operating Temperature (MOT) and Tg for the composite material. Additionally, a 30ºF margin is advised concerning any adhesives used in the construction.

This structural evaluation primarily applies to the area surrounding the composite box. The box, when exposed to the identified fire threat, must effectively contain the fire to prevent the surrounding load-bearing structure from surpassing the Maximum Operating Temperatures (MOTs) determined by the airframe designer, influenced by factors such as material selection.

There are further considerations in the cabin safety requirements including addressing toxicity and smoke density, as mentioned earlier, to ensure the overall safety and well-being of occupants in the event of a fire.

Materials for future energy systems will require higher fire performance to meet increasing safety demands. While there is a clear advantage for safety using batteries over conventional fuels, as there is no explosive material on board, it must be borne in mind that other risks arise with the introduction of an electric power source. These new risks are less familiar to users and emergency responders. The need to withstand extreme temperature environments, not react with by-products of combustion and also maintain structural integrity to prevent further collapse or contact with other systems is a challenge for materials which are under constant scrutiny from design teams looking for lighter and cheaper alternatives.

While polymer composite materials have been the go-to source for answers to increase specific strength and damage tolerance to lighten aircraft, they fall short in applications which need to resist strong thermal, electrical or chemical attack. An increasingly popular class of materials replaces the polymer matrix with ceramic, creating a completely non-combustible material which can also maintain structural integrity even in the most extreme temperature scenarios.

In the realm of materials science, the quest for materials capable of withstanding extreme conditions while maintaining their integrity and performance has led to significant innovations. Among these, Oxide/Oxide Ceramic Matrix Composites (CMCs) represent a pivotal advancement, offering a blend of properties that traditional metallic materials cannot match. These composites, developed to leverage the high temperature capabilities of ceramics without their inherent brittleness, have emerged as a key solution for applications demanding durability and resistance to thermal and oxidative stress. The inception of Oxide/Oxide CMCs marked a significant leap in overcoming the limitations of conventional composites. Designed with a focus on high temperature performance, these materials combine oxide ceramic matrices with reinforcing oxide fibres, yielding composites that excel in environments where metal alloys and non-oxide ceramics can weaken. The intrinsic resistance to oxidation and thermal degradation of Oxide/Oxide CMCs has rendered them an interesting solution in sectors such as aerospace, defence, and energy—industries where materials are routinely subjected to harsh thermal environments and oxidative atmospheres.

Innovations in fibre technology, matrix compositions, and processing methods have enhanced the mechanical properties and durability of Oxide/Oxide CMCs, making them more cost-effective and environmentally sustainable than their predecessors. As we delve into the complexities and contributions of Oxide/Oxide CMCs, we uncover their transformative potential in shaping future material science and engineering, underscoring their role in advancing technological frontiers and meeting the challenges of modern engineering applications.

Historical Development and Material Properties

The historical development of CMCs, particularly Oxide/Oxide CMCs, marks a significant evolution in materials engineering, aiming to meet the demands of high temperature applications where conventional materials fall short. Initially, CMCs were developed to leverage the high-temperature capabilities of ceramics while mitigating their inherent brittleness by incorporating reinforcing fibres, thereby enhancing their toughness and durability. Oxide/Oxide CMCs emerged as a category within this broader field, designed to offer superior resistance to oxidation and thermal degradation compared to non-oxide counterparts like Silicon Carbide (SiC)/SiC composites. This intrinsic resistance to high temperature oxidation is pivotal for applications in the aerospace and energy sectors, where materials are regularly exposed to extreme thermal environments and oxidative atmospheres.

The material properties of Ox/Ox CMCs are defined by their unique composition: an oxide ceramic matrix reinforced with oxide ceramic fibres. This combination not only provides excellent thermal and oxidative stability but also maintains mechanical integrity at temperatures where metals and non-oxide ceramics would fail. The advancement in fibre technology, particularly the development of alumina-based fibres like Nextel 610 and 720, has played a crucial role in enhancing the strength and temperature capability of Ox/Ox CMCs, making them viable for more demanding applications. Moreover, the porosity of the matrix is carefully engineered to optimise the composite's mechanical properties, including its fracture toughness and resistance to thermal shock. These material characteristics are critical for the performance and reliability of Ox/Ox CMCs in service, allowing them to withstand not just high temperatures but also the mechanical stresses and environmental conditions typical of their applications.

The technological advancements in the manufacturing of Oxide/Oxide CMCs have been pivotal in addressing their historical limitations and enhancing their applicability across various high-temperature environments. Innovations have focused on refining fibre production, matrix formulations, and sintering processes. The development of high-quality oxide fibres has been crucial, with specific advancements in the spinning and heat treatment processes to achieve fibres that offer improved strength and durability at high temperature. In matrix technology, the introduction of novel slurry impregnation techniques and sol-gel processes has enabled the creation of denser, more uniform matrices that can distribute loads more effectively under multi-axial loading.

Sintering techniques have also seen significant improvements. Lower temperature sintering processes have been developed to minimise fibre damage during composite fabrication, preserving the integrity and mechanical properties of the fibres within the matrix. This progress in manufacturing technology not only makes Ox/Ox CMCs more cost-effective but also expands their potential as a sustainable alternative to other high temperature materials.

Comparing Oxide/Oxide CMCs with their Non-Oxide counterparts reveals a landscape marked by distinctive advantages and trade-offs, tailored to specific application requirements. Oxide CMCs stand out for their exceptional oxidation resistance and stability in high-temperature environments. Non-Oxide CMCs, such as those reinforced with Silicon Carbide (SiC) fibres, offer superior mechanical properties at extreme temperatures, including higher strength and stiffness. However, their susceptibility to oxidation at elevated temperatures limits their performance over time, necessitating protective coatings that add complexity and cost to their application.

The advancements in Oxide/Oxide CMCs, particularly in fibre technology and matrix compositions, have significantly bridged the performance gap between Oxide and Non-Oxide CMCs. Innovations in manufacturing processes have also played a crucial role, enhancing the mechanical properties and durability of Oxide/Oxide CMCs while maintaining their cost-effectiveness and simplifying their integration into existing systems. Oxide/Oxide CMCs present a more cost-effective solution over the long term, considering their lower maintenance requirements and longer service life in oxidative environments. This economic advantage, combined with ongoing technological advancements, positions Oxide/Oxide CMCs as a compelling alternative for a wide range of high temperature applications, challenging the dominance of Non-Oxide CMCs and traditional high-temperature metallics.

The strategic importance of Oxide/Oxide CMCs spans multiple industries, revolutionising how critical components are designed and implemented for enhanced performance and efficiency. In the aerospace sector, these materials are growing in popularity for combustor and turbine statics, where their high-temperature resistance and oxidation stability significantly improve engine efficiency and reduce maintenance requirements. Similarly, in the energy industry, their ability to withstand corrosive and high-temperature environments makes them ideal for components in power generation systems, contributing to more sustainable and efficient energy production. This cross-sectoral application underscores their transformative potential.

HTMS has played a pivotal role in the evolution and application of Oxide-based CMCs, marking a significant stride in the field of advanced materials. Their contributions have been instrumental in addressing some of the critical challenges that have historically limited the wider adoption of these composites. By pioneering innovative matrix chemistries and processing techniques, HTMS has enhanced the mechanical properties and thermal stability of Oxide/Oxide CMCs, making them more viable for high-temperature applications. One of the key advancements brought about by HTMS is the development of novel matrix materials that can be sintered at lower temperatures. This breakthrough reduces the risk of damaging the reinforcing fibres during the manufacturing process, thereby preserving the composite's integrity and performance capabilities. Such innovations not only improve the quality of the final product but also contribute to reducing production costs, making Oxide/Oxide CMCs a more attractive option for industries reliant on materials that can withstand extreme conditions.

The landscape of advanced materials engineering is witnessing a transformative phase with the maturation of Oxide/Oxide CMCs. These materials face a trifecta of challenges that delineate the current frontier of research and application. Primarily, the quest for enhanced material properties — strength, durability, and temperature resistance — remains at the forefront. This pursuit is not merely academic; it directly impacts the viability of Oxide/Oxide CMCs in extreme environments, where traditional materials succumb to the rigors of high temperatures and corrosive atmospheres. Furthermore, the scalability of manufacturing processes for Oxide/Oxide CMCs presents a significant hurdle. The specialised techniques required to produce these composites demands a level of precision and control that complicates large-scale production. Achieving cost-effectiveness, a critical factor for widespread adoption, hinges on innovating manufacturing technologies that can maintain the exquisite balance between quality and throughput. Moreover, the integration of Oxide/Oxide CMCs into existing systems and materials frameworks underscores a broader challenge of compatibility and adaptability. The development of effective joining techniques, alongside ensuring material compatibility, is essential for the seamless incorporation of these composites into complex assemblies and applications.

Concurrently, advancements in manufacturing technology are set to revolutionise the production landscape for these materials. The advent of additive manufacturing, automated fibre placement, and rapid sintering processes offers a glimpse into a future where Oxide/Oxide CMCs can be produced with unprecedented efficiency and complexity. This evolution in manufacturing is not just about scaling up; it’s about unlocking new geometries, functionalities, and applications that were previously unattainable. As we look to the future, the broader industrial adoption of Oxide/Oxide CMCs seems not just feasible but inevitable. The expanding role of these composites in aerospace, defence, green transport, energy, fire protection and potentially new sectors speaks to their strategic importance in the next wave of technological advancements. In essence, the journey of Oxide/Oxide CMCs is emblematic of the broader trajectory of materials science — a field defined by its challenges but driven by the unyielding pursuit of solutions. As these materials edge closer to realising their full potential, they underscore a commitment to not just meeting the demands of modern engineering challenges but advancing the frontiers of sustainability and efficiency in the process.

The journey of Oxide/Oxide CMCs from their inception to their current standing in the materials engineering landscape encapsulates a narrative of innovation and strategic importance across multiple industries. These composites, heralded for their unparalleled resistance to high temperatures and oxidation, have carved a niche for themselves in critical applications where traditional materials fall short. The evolution of Oxide/Oxide CMCs, underscored by significant advancements in material properties and manufacturing processes, reflects a concerted effort to address the stringent demands of high-temperature environments in aerospace, defence, and energy sectors.

The strategic adoption of these materials in gas turbines and power generation components has not only enhanced performance and efficiency but also underscored the transformative potential of Oxide/Oxide CMCs in driving advancements in material science and engineering. The role of entities like HTMS in pioneering innovations in matrix chemistries and processing techniques has been instrumental in overcoming historical limitations, marking a significant stride in the field of advanced materials. These contributions have optimised the mechanical properties and thermal stability of Oxide/Oxide CMCs, making them more viable and attractive for high-temperature applications.

However, the path forward for Oxide/Oxide CMCs is not devoid of challenges. The quest for enhanced material properties, scalability of manufacturing processes, and integration with existing systems presents hurdles that demand innovative solutions. The future of Oxide/Oxide CMCs lies in the promise of material science breakthroughs and advanced manufacturing technologies that aim to redefine performance benchmarks and expand their application scope. The potential for broader industrial adoption and the role of collaborative ecosystems in fostering innovation highlight the ongoing commitment to not just meet but exceed the demands of modern engineering challenges. This narrative underscores a broader trajectory towards sustainability and efficiency, positioning Oxide/Oxide CMCs at the forefront of materials science, ready to meet the evolving demands of the future.

In the realm of high-end motorsport, the demand for exceptional performance necessitates the use of low-density composite materials that can endure temperatures exceeding 700°C for extended durations. This requirement is critical to optimise the vehicle's performance to its fullest potential. To meet these rigorous standards, the ThermaLite exhaust shield was developed.

Motorsport exhaust shield - ThermaLite

The emergence of novel electric vehicles, including those in the road, rail, and air sectors, has brought about substantial demands for battery power. Ensuring the safety of occupants during thermal runaway is of utmost importance. To address this critical need, IgniShield has been developed, a cutting-edge thermal shielding solution capable of withstanding high temperatures for significantly longer durations compared to existing material options. This advancement ensures enhanced protection and peace of mind for passengers and operators alike.

Electric Vehicle thermal shielding - IgniShield

Anticipating the future of high-speed systems operating in restricted airspace, the demand for cutting-edge solutions that offer multi-functional capabilities becomes paramount. To manoeuvre without detection and maximise operational efficiency, PhantomWeave was developed. Its advanced design and features empower these systems to achieve seamless flexibility while evading detection, enabling them to operate effectively and securely in challenging environments.

High velocity multi-functional casing - PhantomWeave

Our bespoke system is a revolutionary innovation designed for Hydrogen tank casings. Conventional polymer-based casings often struggle with thermal runaway, but our cutting-edge solution offers a multi-layer and multi-functional design, providing unmatched thermal protection and impact resistance. Now, hydrogen tanks can be reliably safeguarded against extreme temperatures and potential impacts, ushering in a greener and more secure future.

Hydrogen tank thermal protection - HyperTherm

We were very happy to be featured in Composites World after our successful exhibition at JEC World '24 in Paris.

CTO Richard Grainger spoke with Senior Tech Editor Ginger Gardiner about HTMS's bespoke aluminum oxide matrix CMC's being produced here in the UK.  You can read the article in full by clicking on the button below, which also covers our current range of novel CMCs.

It's official.....the sky is no longer the limit for HTMS!! 🚀 👩‍🚀 🛰  

UKBAA and Type One Ventures recently launched a joint ‘Venture into Space’ programme, backed by UK Space Agency. After a rigorous judging process, we are delighted to share that High Temperature Material Systems has been chosen as one of the top 10 standout, high growth space tech businesses to take part -read the full press release here. 

“We’re looking forward to working withType One Ventures,UK Business Angels Association,UK Space Agencyand the talented team here at High Temperature Material Systems on our "Venture into Space" journey.” Will Larkin, COO at HTMS.


The other 9 exceptional businesses who we look forward to joining on the cohort are:

Alpha Earth Observationis a downstream Earth Observation company offering a dynamic, user-friendly dashboard via cloud computing for near-real-time monitoring of environmental assets such as agriculture, forestry and urban landscapes -www.alphaeo.com

Antonymis building a network of autonomous micro factories, driven by a cloud-based digital supply chain to enable local and on-demand production of precision aerospace metal parts & components closer to their point of use -www.antonym.tech

AugmentAeroCombining AR Technology with AI and Machine learning for the aviation sector improving safety, efficiency and performance -www.augmentaero.com

Fluidic Logic Ltdtechnology enables the rapid development of manufacture ready designs for fluidic machines: from microfluidics for biotechnology, through soft robotics for wearable technologies, to hydraulic control systems for industrial robotics -www.fluidiclogic.com

Hycean Ltdis a pioneering tech company at the forefront of efficient and sustainable power solutions, innovating with their groundbreaking HYCE™ technology and Hycean-hub platform -www.hycean-ltd.com

IONETICis a one-stop solution for battery pack technology, providing battery pack solutions that meet both performance and cost targets -www.ionetic.uk

QuInAs - ULTRARAM™is a remarkable, patented, memory technology developed by Lancaster University. It exploits a quantum-mechanical process called resonant tunnelling, allowing ULTRARAM™ to deliver non-volatility with fast and energy-efficient write and erase, resulting in high endurance -quinas.tech

Space Poweris leading the industry in LASER power beaming for space applications since 2020 – specifically supplying wireless power banks which are uniquely compatible with any spacecraft -www.space-power.com

UAP industries' flagship innovations, the Atmospheric Processing Plant (APP) and the Electromagnetic Plasma Separator (EMPS) are not just solutions to today’s environmental challenges; they’re keystones in humanity’s quest for interplanetary habitation -uapindustries.com



HTMS Accepted onto UKBAA & Type One's Venture into Space Accelerator

HTMS was delighted to exhibit our novel CMCs as part of the JEC Start-up Booster Village 2024. Our journey from Bristol to Paris began in 2023, applying among hundreds to the Start-up Booster Village competition. We received the exciting news of our successful application in February 2024, allowing just over a month to plan our logistics, marketing materials (including ‘THOSE” orange hoodies) and presentation for the event! 

At the event, our CEO Danilo Di Salvo presented HTMS’s innovative Ceramic Matrix Composite (CMC) technology to a distinguished panel, including leaders from Mercedes-Benz, Airbus, Safran, Techstars, and Owens Corning. It was an enriching experience for our team, with many attending the prestigious conference for the first time, and it was exciting to see how big the world of composites is and that it continue to grow and a farnominal rate.

This year's event was extraordinary, attracting over 40,000 visitors across three days. The Startup Booster Village buzzed with activity, showcasing twenty exceptional startups and drawing thousands of curious visitors. It was fantastic to see our booth, attract a broad range of visitors interested in how our cost-efficient CMCs could address their thermal management challenges, across Automotive, Aerospace, Energy, Space, Marine, Heavy Industry, F1 to name a few!!

The demand for an affordable CMC solution was clear, as many engineers expressed their needs matched by the capabilities of CMCs but deterred by the cost.

The social aspect of the event was equally exciting, with many stands transforming into lively bars and cocktail spots as the day concluded, offering a perfect way to unwind. And, of course, no trip to Paris would be complete without savouring the exquisite local cuisine and wine, providing our team with delightful dinners to reflect on the day’s achievements and share how far we have come in such a short space of time.

In summary, JEC was a monumental triumph for HTMS. With 100+ conversations had, with a similar number of business cards exchanged, leading to over 15 signed NDAs and several ongoing live projects across a number of sectors.

As hinted by our orange hoodies, the future looks exceptionally bright for HTMS and our CMC technology!

We are excited to announce that HTMS has been selected to take part in the NatWest Clean Transport Accelerator at the University of Warwick ⚡ 

The aim of this 6 month accelerator is to help the UK be a green leader in carbon-neutral transport for future mobility. Alongside WMG, University of Warwick they will help us bring our innovations in CMCs to the market quicker!

We can't wait to get started!

HTMS accepted onto NatWest Clean Transport Accelerator

We are delighted to announce that HTMS has been selected as a Startup Booster Finalist by JEC Group due to our innovative CMC technology.

As a result, we will have our own stand at the JEC conference at the beginning of March, we will pitch our materials to world class businesses such as Airbus, Mercedes-Benz AG and Safran, and we will have our own booth for conversations with prospective customers and partners.

Company CEO, Danilo commented: "We are thrilled to have been selected as finalists considering the incredible competition and innovation that is in the composite market at the moment. We are feeling a strong pull-through for CMC material, that is once again reflected in this announcement."

Hopefully, we will see you in Paris 5th to the 7th of March!

Read the full press release here: Composites Startup Booster Finalists 2024  

We're delighted to announce that we have moved in to our new facility!We have moved the HTMS team in to a customised facility in Bristol, just a few minutes up the road from our good friends at the National Composites Centre. This marks an exciting and significant step for us as a business.

HTMS Move to a New Facility in Bristol

We're delighted to announce that we have moved in to our new facility!

We have moved the HTMS team in to a customised facility in Bristol, just a few minutes up the road from our good friends at the National Composites Centre. This marks an exciting and significant step for us as a business.

Co-founder, Danilo Di Salvo commented:
"I'm proud of the whole team - this has been a massive job for us. We needed to find a facility that ticked many boxes and we have located the perfect place for us to scale our CMC products at pace. This new facility will allow us to control our manufacturing environment whilst significantly increasing our R&D pace. I'm absolutely delighted."

Co-founder, Richard Grainger remarked:
"Safety and our environment have always been paramount for us at HTMS. Our new lab ensures that we can work in a safer environment and gives us the space to grow through equipment purchases and increasing our staffing levels. The team have done a thorough and fantastic job."


UK-based advanced materials company High Temperature Material Systems (HTMS) has successfully closed its £300,000 pre-seed funding round. The round was led by SFC Capital, with participation from BBI Investments and a leading UK based angel investor. The funding will be used to accelerate go-to-market and expand the product into a number of other industries.

HTMS Funding Announcement

UK-based advanced materials company High Temperature Material Systems (HTMS) has successfully closed its £300,000 pre-seed funding round. The round was led by SFC Capital, with participation from BBI Investments and a leading UK based angel investor. The funding will be used to accelerate go-to-market and expand the product into a number of other industries. 

HTMS was established in 2021 by two of the UK’s leading composite engineers, DrDanilo Di Salvo and Dr Richard Grainger. The company specialises in producing ceramic matrix composites (CMC) that have historically been used in the aerospace and defence industries, and are now expanding their use case to a number of novel industries including space, nuclear, automotive and energy. CMCs, which were previously underutilised in the UK market, are now generating interest within the advanced materials business as high temperature operation requirements become more apparent. HTMS has created new, low-cost, multi-functional oxide-based CMC materials that allow systems to run at substantially higher efficiency.

HTMS was backed in 2022 by MBDA, one of Europe’s largest defence companies, through winning the Ceramic Matrix Composite Airframe Technology Challenge competition. As a result, HTMS has steadily been building its technology capability as well as commercial partners, which now include the UK’s National Composites Centre. The company has also recently partnered with the UK Atomic Energy Authorityopening up the realms of oxide-based CMCs.

The company is also recently joined by Luke Logan FREng, who worked with Rolls-Royce for over 20 years and was the chief engineer behind the Airbus A380 engine (Trent 900). The company has now developed a strong team to develop its capabilities for the coming years ahead. 

Danilo Di Salvo, CEO at HTMS, commented “We are delighted to have SFC Capital invest in the business and we look forward to working and learning together with one of the UK’s largest investors. HTMS is at the forefront of advanced materials development and we are excited to expand into a wider range of industries over the coming months”.

Adam Beveridge, Investment Associate at SFC Capital added “HTMS are leading the way in the UK in advanced materials development, proven by their previous work with MBDA. Building on its deep tech abilities, we are looking forward to seeing their development within and outside the UK very soon”.


November 2022 marked the end of our very first project.We presented our work to a panel at MBDA in Stevenage highlighting one of our novel high temperature multifunctional Ceramic Matrix Composite systems. We are very proud to have received excellent feedback and we look forward to enhancing our relationship with MBDA further in 2023.

HTMS Complete First Customer Project

November 2022 marked the end of our very first project.

We presented our work to a panel at MBDA in Stevenage highlighting one of our novel high temperature multifunctional Ceramic Matrix Composite systems. We are very proud to have received excellent feedback and we look forward to enhancing our relationship with MBDA further in 2023.

We are grateful to MBDA and the National Composites Centre for creating such an exciting project that has allowed us to launch in to this sector. As we continue to explore the capability of our material systems, we find more and more possibilities in diverse areas.


This Privacy Policy describes how your personal information is collected, used, and shared when you visit or make a purchase from htms.vercel.app (the "Site").

When you visit the Site, we automatically collect certain information about your device, including information about your web browser, IP address, and some of the cookies that are installed on your device. Additionally, as you browse the Site, we collect information about the individual web pages or products that you view, what websites or search terms referred you to the Site, and information about how you interact with the Site. We refer to this automatically-collected information as "Device Information".

We collect Device Information using the following technologies:

"Cookies" are data files that are placed on your device or computer and often include an anonymous unique identifier.

"Log files" track actions occurring on the Site and collect data including your IP address, browser type, Internet service provider, referring/exit pages, and date/time stamps.

"Web beacons", "tags", and "pixels" are electronic files used to record information about how you browse the Site.

When we talk about "Personal Information" in this Privacy Policy, we are talking about both Device Information and Order Information.

How do we use your personal information? 

We use the Order Information that we collect generally to fulfill any orders placed through the Site. Additionally, we use this Order Information to communicate with you and to screen our orders for potential risk or fraud.

We use the Device Information that we collect to help us screen for potential risk and fraud and more generally to improve and optimize our Site.

We share your Personal Information with third parties to help us use your Personal Information, as described above.

We use your Personal Information to provide you with targeted advertisements or marketing communications that we believe may be of interest to you.

Please note that we do not alter our Site's data collection and use practices when we see a Do Not Track signal from your browser.

If you have any questions about this Privacy Policy, or if you would like to exercise your rights, please contact us at info@htms.tech.

We maintain your Order Information for our records unless and until you ask us to delete this information.

 We may update this privacy policy from time to time to reflect changes to our practices or for other operational, legal, or regulatory reasons.

Personal information we collect

How do we use your personal information?

Sharing your personal Information

Behavioural advertising

Do not track

Your rights

Data retention

Changes